CARDEXCHANGE®
PRODUCER

RELEASE NOTES

Last Updated: March 20, 2022

Version 10.5.0.9

July 29, 2024
  • New Funcionality
    • Added support for the Javelin Jack printer

  • New Funcionality
    • Added support for using Printer Filters together with CardExchange® Print Server and CardExchange® Dispatcher

  • New Funcionality
    • CardExchange® Producer LITE in partnership with Matica

  • Improvment
    • Updated supported printers list

  • Improvment
    • Improved support for data coming from CardExchange® Controller CMS

  • Improvment
    • Improved support for data coming from CardExchange® Controller CMS

  • Improvment
    • Improved error message displayed when CardExchange® Producer detects no printers installed

  • Improvment
    • Updated supported printers list

  • Improvment
    • Updated support for SwiftPro K60 printer

  • Improvment
    • Updated support for Magicard 500 printer models

  • Improvment
    • Improved support for Matica printers

  • Bug Fix
    • CardExchange® Cloud Hot Fix 2.3.3 - Improved support for the new authentication token

  • Bug Fix
    • Corrected issue when resetting a Photo in the Card Designer properties window that resulted in a grey box instead of the correct picture

  • Bug Fix
    • Updated URL connections to the new CardExchange® website

  • Bug Fix
    • Added support for Signatures and ID documents coming from CardExchange® Controller CMS

  • Bug Fix
    • Fixed Key derivation for AN10957

  • Bug Fix
    • Fixed issue where encoding using the printer IDP Smart-81 would make CardExchange® Producer crash

  • Bug Fix
    • Solved concurrency issyes when printing with the Zebra ZC family

Version 10.5.0.1

September 20, 2023
  • Improvement

    Branding improvements

    • CardExchange Producer desktop shortcut replaces the old Gateway one
    • CardExchange Producer version numbers now used instead of the Gateway one
    • CardExchange Visitor is now hidden by default on new installations and
  • Improvement

    Refactored the memory handling for images to avoid out of memory exceptions when using large photos/images

  • Improvement

    Updated the Wacom SDK to support the STU-540

  • New Functionality

    Added contactless encoding support for Magicard Prima 8

  • New Functionality

    Add Support for Mifare DESFire EV2/EV3 using Omnikey 5427/Elatec TWN4 encoders

    • UpdateBinary - available from DESFire EV2

    • RandomUID - available from DESFire EV2

    • SAM - Shared Application Management (SAM) available from DESFire EV2

  • New Functionality

    Added new Canon EOS camera supported models:

    • EOS R100
    • EOS R8
    • EOS R50
    • EOS R6 Mark II
    • EOS R7
    • EOS R10
    • EOS R3
    • EOS M50 Mark II

  • New Functionality

    Added support for IDP Smart 81

  • New Functionality

    Added support for Zebra ZC300

  • New Functionality

    Added contactless encoding over Ethernet support foe the Magicard 300/600 v2 printers

  • New Functionality

    Added support for Mifare DESFire encoding using the Omnikey 5122 encoder

  • Bug Fix

    Resolved contactless encoding issues with IDP Smart 70

  • Bug Fix

    Resolved issue with the printer name used for IDP Smart 31

  • Bug Fix

    Reverted the sentinel dll files used for the dispathcer/print server as they were causing an issue with the license manager

Version 1.4.3.0

November 14, 2022
  • Bug Fix

    Resolved issue with Matica XPS support

  • Bug Fix

    Added Matica XPS printers to printerlist.xml file

  • Bug Fix

    Included missing files for Matica XPS support

Version 1.4.2.9

November 04, 2022
  • New Functionality

    Added Matica XPS magnetic encoding support

  • New Functionality

    Added Matica XPS card movements for contactless encoding

Version 1.4.2.8

October 20, 2022
  • New Functionality

    Implemented the possibility to filter on Photo = null or Photo <> null in the Controller CMS data-source plugin

  • Improvement

    Updated logos and splashscreens to latest versions

Version 1.4.2.7

August 03, 2022
  • New Functionality

    Added printer plugin for Matica Edisecure printers

  • New Functionality

    Added Matica Edisecure magnetic encoding support

  • New Functionality

    Added Matica Edisecure card movements for contactless encoding

Version 1.4.2.6

July 18, 2022
  • New Functionality

    ACT Plugin Addition

  • Improvement

    Added fields for Controller

  • Improvement

    Cloud login now uses Edge

  • Improvement

    Set maximum records to load in to 100k for Cloud

  • Improvement

    IDP SMART 70 improvements

  • Improvement

    NET2 improvements

  • Improvement

    Add address to fields in cloud connector

  • Improvement

    Updated lsapiw32.dll and lsapiw64.dll to version 10.0.100

  • Bug Fix

    Fixed cloud filtering issue

Version 1.4.2.5

September 6, 2021
  • Bug Fix
    Automated printing for Controller CMS was only working with NumberOfTries = 0
  • Bug Fix
    Elatec encoders were locking the com port after an error was encountered
  • Bug Fix
    DESFire SAM AV2: Allow for a diversification input longer than 12 bytes
  • Bug Fix
    EDSImage.dll was not updated during installation due to Canon using a lower version number, this is now always updated

Version 1.4.2.4

May 6, 2021
  • Bug Fix
    Automated printing for Controller CMS was only working with NumberOfTries = 0
  • Bug Fix
    Elatec encoders were locking the com port after an error was encountered
  • Bug Fix
    DESFire SAM AV2: Allow for a diversification input longer than 12 bytes
  • Bug Fix
    EDSImage.dll was not updated during installation due to Canon using a lower version number, this is now always updated

Version 1.4.2.3

December 17, 2020
  • Bug Fix
    Fixed missing DrawBitmap function from IDP SDK headers
  • Bug Fix
    Updated IdentityModel.OidcClient.dll version to avoid issues with InstallShield

Version 1.4.2.2

December 16, 2020
  • New Functionality
    Added print filter to override the selected printer based on a database field

Version 1.4.2.1

November 27, 2020
  • New Functionality
    Added support for Canon EOS SDK 13.13.0
  • New Functionality
    Added inline encoding support for Magicard Prima 8 600DPI (CX-D80H)
  • Bug Fix
    Fixed an issue with the Crypto settings for Desfire encoding with Elatec encoders
  • Bug Fix
    Fixed an issue with image rotation where the previous image was loaded instead of the correct one
  • Bug Fix
    Fixed an issue with the Omnikey 5x27 encoders where the ATR response was not handled correctly for some card types

Version 1.4.2.0

October 2, 2020
  • New Functionality
    Added laser engraving support with IDP Smart 70 Laser engraver printer modules (Plugin required)
  • Improvement
    Added support for MySQL DataTime format
  • Improvement
    Added option to force a character set of a string for MySQL connection in the Advanced Options menu
  • Bug Fix
    Fixed an issue with Controller CMS plugin when the chip serial number is set to Null
  • Bug Fix
    Fixed an exception when opening the advanced options dialog

Version 1.4.1.3

August 26, 2020
  • Bug Fix
    Fixed an issue with Printer Server missing initialization files causing a unified API error from licensing (Status Code: 210011)
  • Bug Fix
    Fixed an issue when encoding with Elatec encoders

Version 1.4.1.2

July 7, 2020
  • Improvement
    CardExchange Producer is much quicker to close now
  • Bug Fix
    Potential fix for an issue that crashed the application when a variable would be created or edited.
  • Bug Fix
    Fixed an issue that made LDAP take much longer to load than necessary

Version 1.4.1.1

June 9, 2020
  • Improvement
    Added the extra free fields to the data-source plug-in for CardExchange® Controller
  • Improvement
    Added an advanced option "Disable eject the card for encoding only"

Version 1.4.1.0

April 10, 2020
  • New Functionality
    Added support for magnetic encoding with HiTi printer
  • Improvement
    Added a better exception handling to avoid a software crash using PDF417 barcodes when the data to encode is not supported by the barcode
  • Improvement
    Added Mifare classic support for EWTJ-680S reader (Fitted in HiTi Printer)
  • Bug Fix
    Fixed the write command itself and the way the file settings were created when using Eletec TWN4 encoders for Desfire encoding

US business only within scope

ISO/IEC 27001:2013 

United States

2010 Elkins Way, Suite 1122
Brentwood, CA 94513

Monday – Friday
9am – 5pm (EST)
+1 (925) 529 4999

Netherlands

Smallepad 32
3811 MG Amersfoort

Monday – Friday
9am – 5pm (CET)
+31 (0)20 2251 447

© 2023 CardExchange Solutions, Inc.